CAT CLASS:
0020094
3 Head Air Scabbler
Overview
Air-powered scabblers are ideal for removing spalling, loose, deteriorating, and oil-soaked concrete for new overlayments. They can also be used for ramping large slab differences, texturing parking deck and wheelchair ramps, producing slip-resistant surfaces, and removing floor coatings. They utilize carbide bits in multi-head configurations to hammer concrete or asphalt surfaces, removing bulk material at penetrations up to 1/4" per pass. In this 3-head air scabbler, the working width is 7” and the maximum BPM is 1200. The air requirement is 100 CFM at a pressure of 85 PSI. Towable diesel air compressors suitable for powering air-powered scabblers are also available for rent.
Specifications
Products are subject to availability.
| Make | EDCO |
| Model | CD-3 |
| Air Requirement | 100 CFM @ 85 PSI |
| Heads | 3 |
| Max BPM | 1,200 |
| Weight | 165 lbs |
| Working Width | 7" |
Safety information
Safety Requirements
- Eye Protection
- Hearing Protection
- Gloves
- Safety Shoes